Sales: (800) 955-5337
Service: (480) 654-8015
TORQUE BARZWarrior Torque Barz are a necessity for any pickup or sport utility vehicle that is operated in on-road or off-road conditions, especially if the vehicle has been lifted or the suspension has been altered. Our Torque Barz prevent axle wrap, or spring windup, and also possible breakage due to high torque loading or unloading while climbing steep grades, under high acceleration or over broken uneven surfaces especially when hauling or towing heavy loads. Also, they help eliminate the danger of spring or shock absorber failure during sudden axle drops. Torque Barz are unique in their design with a removable interlocking pin that gives you needed maximum suspension travel. Simply by removing the pin the Torque Barz is allowed to slide giving increased freedom to the suspension. Torque Barz are manufactured using the highest grade steel available, HRP&O, and are equipped with urethane bushings for long life under all driving conditions. Some drilling and/or welding is required. |
TRACTION LIFTActs as a lifting device and as a traction bar. Warrior traction lift is a fully adjustable traction bar to help preload all your traction needs. The traction lift replaces your 2 1/2" lift block or can be used as a 2 1/2" lift for added ride clearance. The system mounts between your leaf spring pack and your differential housing, with the main bar pointed forward, on the rear end housing of your vehicle. The vertical "U-shaped" bars extend above the leaf spring where two cross pins are installed. The traction lift system is not designed to be used in the front of the vehicle. If you are not replacing lift blocks when you install your traction lift, you will need longer u-bolts of at least 2 1/2" to complete the installation. |